| Model |
SYT400 |
SYT500 |
SYT600 |
SYT1000 |
SYT1500 |
SYT2000 |
| Capacity |
400KVA /400KW |
500KVA/500kW |
600kVA/600kW |
1000KVA/ 1000kW |
1500KVA/1500KW |
2000KVA/2000kW |
| INPUT |
| Input Method |
3P + N + PE |
3P + N + PE |
| Input Voltage |
380/400/415VAC (Line voltage) |
380/400/415VAC (line voltage) 220/230/240VAC (phase voltage) |
| Input Frequency |
- |
50/60Hz |
| Power Factor |
> 0.99 |
> 0.99 |
| Current Distortion Rate |
THDi<3% (100% linear load) |
THDi<3% (100% linear load) |
| Voltage Range |
304-478VAC (Line voltage) full load; Linear derating of 304-228VAC (Line voltage) load from 100% to 75% |
304-478VAC (line voltage) full load;
Linear derating of 304-228VAC (line voltage) load from 100% to 75% |
| Frequency Range |
40 - 70 Hz |
40 - 70 Hz |
| BATTERY |
| Battery Voltage |
± 240VDC (Adjustable for sections 32-44) |
± 240VDC (Adjustable for sections 32-44) |
| Charging Power |
20% *Active power |
20% *Active power |
| Charging Voltage Accuracy |
± 1% |
± 1% |
| BYPASS |
| Rated Voltage |
380/400/41 SVAC (Line voltage) |
- |
| Bypass Voltage |
- |
380/400/415VAC (Line voltage) 220/230/240VAC (Phase voltage) |
| Voltage Range |
Default can be set to -20%~+15%; Upper limit+10%,+15%,+20%,+25%, lower limit: -10%, -15%, -20%, -30%, -40% |
Can be set, default -20% -+15%; Upper limit+10%,+15%,+20%,+25%; Lower limit -10%, -15%, -20%, -30%, -40% |
| Frequency Range |
Can be set (± 1Hz, ± 3Hz, ± 5Hz) |
- |
| Overload Capacity |
- |
110%, long-term employment,101%<load<125%, not less than 5 minutes 125%<load<150%, not less than 1 minute,>150%, 1 second |
| OUTPUT |
| Rated Output Voltage |
380/400/41 SVAC (Line voltage) |
380/400/415VAC (line voltage); 220/230/240V AC (phase voltage) |
| Rated Frequency |
50 / 60 Hz |
50 / 60 Hz |
| Power Factor |
1 |
1 |
| Voltage Accuracy |
± 1.0% |
± 1.0% |
| Frequency Tracking Range |
50/60Hz ± 3Hz, (can be set to ± 0.5~5Hz) |
Can be set, ± 0.5Hz - ± 5Hz, default ± 3Hz |
| Frequency Tracking Rate |
0.1 Hz/s to 5 Hz/s, (Adjustable, default 2Hz/s) |
Can be set, 0.5Hz/s-3Hz/s, default 0.5Hz/s |
| Frequency Accuracy |
0.1% |
0.1% |
| Output Dynamic Response |
<5% (20% -80% -20% step load) |
<5% (20% -80% -20% step load) |
| Dynamic Recovery Time |
<20ms (0% -100% -0% step load) |
<20ms (0% -100% -0% step load) |
| Output total Harmonic Distortion(THDu) |
- |
<1% (linear load),<5% (non-linear load) |
| Inverter Overload Capacity |
110%, switch to bypass after 1 hour; 125%, switch to bypass after 10 minutes; 150%, switch to bypass after 1 minute 150%, Switch to bypass after 200ms |
110%, switch to bypass after 1 hour; 125%, switch to bypass after 10 minutes; 150%, switch to bypass after 1 minute 150%, Switch to bypass after 200ms |
| Three Phase Accuracy |
120° ± 0.5° |
120° ± 0.5° |
| Voltage lmbalance |
± 3% (100% unbalanced load) |
- |
| Peak Ratio |
3:1 |
3:1 |
| SYSTEM |
| Rated Output Voltage |
≥ 97% |
≥ 97% |
| Battery Mode |
≥ 97% |
≥ 97% |
| Display |
LCD+LED+10 inch color touch screen |
LCD+LED+10 inch color touch screen |
| Safety Regulations |
IEC62040-1, IEC60950-1 |
IEC62040-1, IEC60950-1 |
| EmS |
IEC62040-2; IEC61000-4-2(ESD); IEC61000-4-3(RS); IEC61000-4-4 (EFT); IEC61000-4-5 (Surge) |
IEC62040-2; IEC61000-4-2(ESD); IEC61000-4-3(RS); IEC61000-4-4 (EFT); IEC61000-4-5 (Surge) |
| Protection Level |
IP20 |
IP20 |
| Noise (1 meter) |
72dB @ 100% load, 69dB@45 %Load |
72dB @ 100% load, 69dB@45 %Load |
| Working Temperature |
0 - 40℃ |
0-40 ℃ (working temperature) -25 ℃-70 ℃ (storage temperature) |
| Relative Humidity |
0-95% (No condensation) |
0-95% (No condensation) |
| Standard Configuration |
USB, RS232, RS485, Dry connection point card, battery cold start, dust screen |
USB, RS232, RS485, Dry connection point card, battery cold start, dust screen |
| Options |
SNMP card, AS400 card, parallel component, lightning protection component LBS |
SNMP card, AS400 card, parallel component, lightning protection component LBS |
| SIZE |
| W * D * H mm |
1200* 1000*2000 |
1200*1100*2000 |
2000*1100*2000 |
2800*1100*2000 |
3400*1100*2000 |
